Tips & tricks for building your tree house
It’s almost impossible to find someone who has never dreamed of building or having their own tree house. The idea of a refuge, a space fully integrated with nature and offering a privileged view, appeals to almost all age groups.
There are examples of tree houses of all sizes and complexities, from small raised platforms to highly complex structures, including electrical and hydraulic installations. Some websites that specialize in the subject offer valuable tips to help make those dreams come true.
Pick the right tree
The tree to use should be chosen carefully. First of all, you should check that it is healthy, has no obvious disease, is well-rooted, and preferably has already reached its peak growth. These reviews are vital as this tree is the foundation and backbone of your home.
There are several variables and possibilities that need to be considered. You can use a single thick trunk, multiple branches of the same tree, or even trunks from nearby trees. This choice affects the possibilities for the dimensions of the structure as well as the consideration of spans and balances that can reduce or increase the load on the trees. For example, if you are attaching the scaffolding to two different trees, you should take into account that each tree has different wood densities and can react differently to the wind.
Possibly the most critical problem when building a tree house is the structuring of the base plate, which makes it easier to fasten the rest of the building. There are several options for this step, with different variables leading to different solutions.
Perhaps the most important source for building a tree house is the guide, which covers most of the possibilities and potential problems that can arise with such construction. A little tip: terrace screws are ideal for attaching the base plates to securely attach your tree house.
It is important, however, that the beams have some kind of reinforcement, e.g. B. diagonal brackets or even auxiliary columns on the floor, so as not to overload the connections. For larger, more extensive structures, multiple trees are better than one, but this is not always possible.
For individual trees, look for ones that have the trunk properly divided into large branches. This way you will get some good support and anchor points for the base of the tree house.
Choosing the right trees
You should also look for healthy deciduous or coniferous trees, such as oak, maple, ash, and some apple, beech, and hemlock, which can also work well.
Designing your treehouse is about both the tree in question and your carpentry skills. You should also consider the height above the ground that you want the treehouse to be.
The right size of the tree
For a tree house that is an average of 2.5 x 2.5 m, a trunk diameter of 30.5 cm or more is recommended if a single tree is used. When supporting over two or more trees smaller minimum diameters are suitable. The design of the tree house can make it harder than usual. In this case, a larger diameter or a harder type is required. Deciduous trees tend to have denser wood that can carry larger loads.
The taller the tree, the more you need to consider safety precautions for your adventurous little ones. About 2.5 to 3 meters is usually an ideal height.
What kind of material do you need?
Since you’re building something, you need building materials to work with. In general, you’ll need at least some or all of the following items:
- Wood or lumber
- Terrace material
- Galvanized lag bolts and washers
- Terrace screws
- Galvanized joist hangers
- Galvanized rafter ties
- Nails, deck screws, etc.
We hope that you like our tips & tricks and that you can now start your new project more easily.
Living ideas and decoration –